hinzna
4 years ago
He said TJ Max. Full stop. =d>
Palama
4 years ago

then I have no interest

frankj1 wrote:



🤣
Speyside2
4 years ago
Jonsey, you are more wolverine than weasel.
Speyside2
4 years ago
Why not go upscale and take a working vacation to Rodeo Drive?
bgz
  • bgz
  • Herf-A-Holic
4 years ago

do you offer an installment plan?

frankj1 wrote:



The best ones are the 6 / 12 monthly payments, no interest plans!

Palama wrote:



then I have no interest

frankj1 wrote:



LMFAO!!!
frankj1
4 years ago
I get taken for granted.
Mr. Jones
4 years ago
Yes yooouuuu dOOOOOOOO

Boooo Booooo !!!

🤔🤔🤔🤔🤗🤗🤗🤗
Mr. Jones
4 years ago
Found a $10 bill in a turkey hill trash can on Friday!!!

Dumb peeps not only throw away winning scratch off lottery tickets....
They are throwing away GREEN REAL LIFE C.A.S.H. !!!!

I'VE FOUND TONS OF $1.00 BILLS AND $5.00 'S
THIS WAS MY FIRST trash can "SAWBUCK"!!!
8trackdisco
4 years ago
JOnSie,

How much per pound can I get for rusted alloy steel from an old firepit?
Mr. Jones
4 years ago
It's going for .08 a pound on East coast...

They call it "light iron"....
Dont let them know it's rusted...just get on the scale, drive off to pile, dump it...get back on the scale and cash out...
If it is heavy melt? Let them know that first ..heavy melt is a different pile than "light iron"....

Now ...very thick steel...like car rotors, metal sewer pipes,
Angle iron, rebar, beams...etc....

That is called "heavy melt" and gets .11 cents a pound..

Now... whatever you do!!!

Always seperate your metals...

Unscrew and take apart stuff that has multiple metals...
You'll get way more money...

Aluminum .45 cent lb.
Brass $1.80
Copper various #'s $3.00-3.85
Wire low yield .90 lb
Medium yield $1.40
High yield $1.90
Stainless .45 lb.
Car battery .25-30 lb
Is your basic numbers ..
Dg west deptford
4 years ago
$10. Per 100 lbs. In west Deptford

Copper, brass, lead, stainless steel. Everything else goes to the curb

If Jonsey lived closer he'd love my curb.
8trackdisco
4 years ago

It's going for .08 a pound on East coast...

They call it "light iron"....
Dont let them know it's rusted...just get on the scale, drive off to pile, dump it...get back on the scale and cash out...
If it is heavy melt? Let them know that first ..heavy melt is a different pile than "light iron"....

Now ...very thick steel...like car rotors, metal sewer pipes,
Angle iron, rebar, beams...etc....

That is called "heavy melt" and gets .11 cents a pound..

Now... whatever you do!!!

Always seperate your metals...

Unscrew and take apart stuff that has multiple metals...
You'll get way more money...

Aluminum .45 cent lb.
Brass $1.80
Copper various #'s $3.00-3.85
Wire low yield .90 lb
Medium yield $1.40
High yield $1.90
Stainless .45 lb.
Car battery .25-30 lb
Is your basic numbers ..

Mr. Jones wrote:



Was looking to learn what my rusted out firepit (about 40 lbs) would get me if brought it to a metals guy.
Is it worthless rusted?
Mr. Jones
4 years ago
40 x .08 = $3.20 cents on the small scale...
They are calibrated by 1 lb increments

If you use the big vehicle scale?
They are calibrated by 20 lb increments...

Soooo'
35 lbs is paid at only 20 lbs
45 lbs is paid at only 40 lbs

*****AND FOR GOD'S SAKES!!!!!

***DO NOT LEAVE YOUR CAR ON THAT FREAKIN SCALE AND GET OUT TO GO GET YOUR MONEY....DRIVE OFF THE SCALE AND PARK SOMEWHERE ELSE.....DO NOT HOG THE SCALE LIKE A MORON ...

I HATE SCALE HOGGERS THAT TRY TO GET PAID LEAVING VEHICLES ON THE SCALE FOR MINUTES ON END ...

IT IS RUDE AND ONLY **** DO THAT...
Mr. Jones
4 years ago
**** azzholes
8trackdisco
4 years ago
JonSiE,

What can I get for a 10 year old sink and a used American Standard faucet?
Where do I get it?
Mr. Jones
4 years ago
Is the sink stainless steel?
Single or double?

A double is usually 10-15 lbs
Stainless is bringing .65 cents a lb

So $6.50 or $9.75

Take it to a metal recycling yard.

You gotta take the faucet apart to get the "most" money...
Remove all hoses, clip of the brass screw nuts with a bolt cutter. Remove bottom plastic plate.
Unscrew the handle with a small Allen wrench ( if one piece) or take off handles with a Phillip screw driver ..
Take it the plastic guys in the handle... usually the outer part is cast aluminum .55 lb...and the actual water touching parts are yellow brass $2.10 lb...
Prolly get $4.50-7.00 for the faucet ..
Mr. Jones
4 years ago
Is the sink stainless steel?
Single or double?

A double is usually 10-15 lbs
Stainless is bringing .65 cents a lb

So $6.50 or $9.75

Take it to a metal recycling yard.

You gotta take the faucet apart to get the "most" money...
Remove all hoses, clip of the brass screw nuts with a bolt cutter. Remove bottom plastic plate.
Unscrew the handle with a small Allen wrench ( if one piece) or take off handles with a Phillip screw driver ..
Take it the plastic guys in the handle... usually the outer part is cast aluminum .55 lb...and the actual water touching parts are yellow brass $2.10 lb...
Prolly get $4.50-7.00 for the faucet ..
8trackdisco
4 years ago
It is a double sink. Not stainless steel. Probably ceramic. It is the old school sink when sinks were just sinks.

If it is ceramic, do I still take it to the metal recycle place? Is ceramic recycling a thing?

Thank you, Jonsie.
Ram27
4 years ago

It is a double sink. Not stainless steel. Probably ceramic. It is the old school sink when sinks were just sinks.

If it is ceramic, do I still take it to the metal recycle place? Is ceramic recycling a thing?

Thank you, Jonsie.

8trackdisco wrote:




^8:


Is ceramic considered recycling?
Ceramic items can be donated or tossed.

Ceramic items cannot be recycled at most facilities, though sometimes facilities that recycle bricks and concrete will recycle ceramics.Jun 24, 2018
8trackdisco
4 years ago

^8:


Is ceramic considered recycling?
Ceramic items can be donated or tossed.

Ceramic items cannot be recycled at most facilities, though sometimes facilities that recycle bricks and concrete will recycle ceramics.Jun 24, 2018

Ram27 wrote:



Thank you, Ram.
Users browsing this topic