So just my 2 cents.
http://www.bestbuy.com/site/olspage.jsp?skuId=8293456&type=product&id=1173577986415
The television is pretty solid. I need to do some calibrating, I think, but watching HDTV is sharp, really sharp. Seems to have a good scaler built in too.
A few cautions on HD in general. First, unless you're looking at a 56 or greater TV, for the most part 1080p vs 720p is just math. HD is typically broadcast in 720p or 1080i, so in most cases some "bit juggling" happens inside the TV to convert the output. Yes, 1080 lines is higher resolution than 720, but if you have crappy electronics in the TV taking the 720 up to 1080, you are not getting much. It's easier for the electronics to down-scale than up-scale.
Also, pay attention to the amount of light in the room at the time of day you normally watch TV. If it's a bright room, an LCD flat panel will be a better choice than a plasma, and most DLP rear-projection TV's will be better than LCD or LCOS - because, mostly, of the brighter bulbs.
In any case, no HDTV should be "lit" - lighting should be off to the sides of the tv, not directly shining on it.
Source matters. DISH HD, OTA if you can get it, or Cable - The TV I mentioned has clear-QAM, so any unencrypted HD (typically your locals) will look awesome with the native tuner.
Good luck!