deadeyedick
Tuesday, January 13, 2015 7:58:40 PM

I'm hoping I can get some replacement screws.

Abrignac wrote:

Wrong forum noob. 🤫

DED

Chewmaize
Tuesday, January 13, 2015 8:37:04 PM
Dremel and the proper bits will bring it back to life........SLOWLY.
Abrignac
Tuesday, January 13, 2015 8:43:28 PM

Dremel and the proper bits will bring it back to life........SLOWLY.

Chewmaize wrote:

Naw. If wallored out for bigger screws the blades will catch on the wider screws.

spectresquad
Tuesday, January 13, 2015 8:54:31 PM
Screws from Glasses? The Fingernail polish can be softened by a drop of fingernail polish remover(acetone) on the thread side. Green locktight does not hld the screws permanently, it is for temp hold.
Abrignac
Tuesday, January 13, 2015 9:00:51 PM

Screws from Glasses? The Fingernail polish can be softened by a drop of fingernail polish remover(acetone) on the thread side. Green locktight does not hld the screws permanently, it is for temp hold.

spectresquad wrote:

Thanks for the suggestions.

banderl
Tuesday, January 13, 2015 9:10:31 PM
You can use the Locktite or epoxy, if you need to loosen it up just put a lighter to it. 300 something degrees will soften them up.
Abrignac
Tuesday, January 13, 2015 9:27:57 PM
It seems this thread, like 98.2% of all threads posted here is suffering from drift.

I do appreciate all of the suggestions, but I was only trying to ID the cutter. That has been done.

Now I can attempt to have it serviced under warranty if feasible. If not, maybe I can at least obtain the correct replacement screws.

Loctite seems like an option to secure replacement screws, but not a solution to seal the edges shut.

Abrignac
Tuesday, January 13, 2015 9:30:19 PM

Oh, give me the beat boys, and free my soul

I want to get lost in your rock and roll and drift away

wheelrite wrote:

Phag,,,

illinichaser
Tuesday, January 13, 2015 9:31:33 PM

It seems this thread, like 98.2% of all threads posted here is suffering from drift.

I do appreciate all of the suggestions, but I was only trying to ID the cutter. That has been done.

Now I can attempt to have it serviced under warranty if feasible. If not, maybe I can at least obtain the correct replacement screws.

Loctite seems like an option to secure replacement screws, but not a solution to seal the edges shut.

Abrignac wrote:

So you're saying you don't want our help?[-( 🤐

That's just not very nice![-x 😳

Abrignac
Tuesday, January 13, 2015 9:32:52 PM

So you're saying you don't want our help?[-( 🤐

That's just not very nice![-x 😳

illinichaser wrote:

It seems I'm beyond help.

bs_kwaj
Tuesday, January 13, 2015 9:38:22 PM

So you're saying you don't want our help?

illinichaser wrote:

So, there is a 1.8% chance of staying on topic.

👍

[sarcasm]

Abrignac
Tuesday, January 13, 2015 10:03:17 PM

So, there is a 1.8% chance of staying on topic.

👍

[sarcasm]

bs_kwaj wrote:

Wouldn't that be a stretch from a glass half empty perspective.

cacman
Wednesday, January 14, 2015 11:56:22 AM
Check your local electronics or jewelry store for small screws.

Buy a Palio. Excellent replacement warranty if ANYTHING goes wrong.

sd72
Wednesday, January 14, 2015 12:13:53 PM
Buy a xikar. Excellent replacement warranty if ANYTHING goes wrong.
ZRX1200
Wednesday, January 14, 2015 12:54:28 PM
Buy a razor blade, can use it in a bum fight or for a coke party also.
cacman
Thursday, January 15, 2015 1:01:22 AM

Buy a xikar. Excellent replacement warranty if ANYTHING goes wrong.

sd72 wrote:

Just don't drop a xikar. And watch that spring.

Straight razor - shave the face and cut the cigar.

Buckwheat
Thursday, January 15, 2015 8:43:46 AM
Kind of looks like some of the Savoy Cutters i've seen. They have screws to take them apart like the one in the picture. I can't post a link to them as the only ones I could find are on competitors websites. Just try a google search and you will find a bunch for sale. I hope this helps.
Mobile! Terms | Privacy | Contact Us | Help | © 1998-2026, CigarBid.com